The numbers
As stated by the listing on October 18, 2026.
- Asking price
- $1,950,000
- SDE
- $824,897
- Gross revenue
- $1,897,412
- Multiple
- 2.36x
- Established
- 2010
- Employees
- 5
Why we like it
Eagle County sits under building code snow loads that run far above what most of the country designs for, since roofs below Vail and Beaver Creek have to carry loads a wood-framed house elsewhere never sees. That load pushes architects and engineers toward steel wherever a roof needs to span wide or carry weight a stick frame cannot, which is why structural steel shows up constantly in custom mountain homes and commercial builds here even in a county this size. Fabrication itself is a build-to-print trade: a shop takes a set of drawings stamped by a licensed engineer, cuts and welds the pieces to those tolerances, and ships them to the site for someone else to erect. This shop runs that process with five employees and an owner who, at this size, is almost certainly also the estimator pricing jobs and the person the general contractors call first when a bid goes out. Start by asking for the signed backlog rather than trailing revenue, because a fab shop's income is really a sequence of discrete projects moving through the floor, and what has already been billed says nothing about what is queued for the next two quarters. The structural lever worth watching is erection: a shop that only fabricates hands the installation margin to whoever bolts the steel together on site, and picking that scope up in-house is often the second business sitting inside this one.
You probably need a licence to run this
No single credential lets the owner personally run a steel fabrication shop the way a contractor's license governs plumbing or electrical work, but the trade still runs on certifications that matter to buyers of the output. Welders typically need current AWS D1.1 structural welding certification, and if this shop fabricates for larger commercial jobs it may hold AISC certification tied to its quality program and personnel, which does not automatically transfer to a new owner and needs to be confirmed and maintained. Colorado has no statewide general contractor license, but if the shop performs any field erection itself, check whether Eagle County or the relevant town requires a local contractor registration. A buyer without a welding or fabrication background can hire for those seats, but should not assume the certifications ride along with the sale.
What worries us
- Owner dependence on estimating and GC relationshipsWith five employees, the owner is likely the one who prices jobs, carries the engineering judgment calls, and holds the relationships with the general contractors who send work here. Losing that person without a transition plan risks losing the pipeline along with them.
- Lumpy, project-based revenue tied to resort-area constructionRevenue comes from a handful of discrete contracts rather than a recurring base, and demand is tied to high-end mountain real estate and commercial construction activity, which can slow sharply when financing conditions or tourism-driven development cools.
- Certification and equipment continuityWelder certifications and any shop-level fabrication certification are tied to specific people and documented quality programs, not to the business itself, so staff turnover after a sale can jeopardize the credentials that make the shop eligible for certain jobs.
The callSuits a buyer with steel, welding, or construction estimating experience who can step into the owner's bidding role; a poor fit for a purely financial, hands-off buyer.
Our calculations
Our standard SBA 7(a) acquisition structure applied to the asking price. Assumptions below.
Sources
| SBA 7(a) loan | $1,852,286 |
| Seller standby note | $102,905 |
| Buyer cash at close | $102,905 |
| Total sources | $2,058,096 |
Uses
| Purchase price | $1,950,000 |
| Closing costs (est.) | $58,500 |
| SBA guaranty fee | $49,596 |
| Total project | $2,058,096 |
- Monthly payment
- $23,715
- Annual debt service
- $284,584
- DSCR
- 2.43xSTRONG
- Injection check
- Meets 10% ($205,810 against $205,810 required)
- Closing costs estimated at 3% of asking price
- Owner salary of $120,000, loaded
- Rate of Prime + 2.25% = 9.25%
- 10-year term, fully amortizing
- Injection split half cash, half seller standby note
How we would go about buying it
The order matters. Every step below is free until the last one, and each is a chance to walk away before it costs you anything.
- 1
Call the broker, not the bank
The listing is brokered, so the broker is the gate. Ask for the CIM and the last three years of tax returns, and expect to sign an NDA first. Do this before you talk to a lender: no lender will size a loan without the numbers, and the broker will not release them to a lender you have not engaged.
Open the listing - 2
Ask these before you spend anything
Specific to this business, from our read of the listing. The answers decide whether the numbers above survive contact.
- What is the current signed backlog (contracts in hand, not yet billed) for the next two to three quarters, and how does that compare to the revenue already recognized this year?
- What welding certifications do the current welders hold (AWS D1.1 or equivalent), and does the shop carry an AISC certification that would need to be requalified or re-registered under new ownership?
- Who currently writes estimates and manages the relationships with the general contractors who send work here, and will that person stay on through a transition period?
- What share of revenue comes from the top three general contractors or developers, and is any of that work tied to a single project that ends on a fixed date?
- Does the shop currently handle any erection or field installation itself, or does it hand that scope to another contractor, and what would it take to bring it in-house?
- 3
Take it to lenders who do this size
Talk to more than one. Rate is the least of it: the lender who has done fifty of these in Colorado will close, and the one who has done two will waste your quarter. Below are the lenders whose typical deal size actually fits this one.
- 4
Structure the offer around the coverage
Our structure clears the floor at 2.43x, and a lender will run its own version with its own add-backs. If the earnings come back lower than stated, the price has to come down or the seller note has to grow. Model both before you make an offer.
Model it yourself
Who we would call
Active Colorado acquisition lenders whose typical deal size fits this one.
- Hanmi Bank
79 loans in COmedian $750,000median rate 9.00%~18 days to first disbursement
- VelocitySBA, LLC
22 loans in COmedian $787,500median rate 9.75%~17 days to first disbursement
- Byline Bank
11 loans in COmedian $707,000median rate 10.00%~21 days to first disbursement
Loan counts and medians are that lender’s change-of-ownership loans in Colorado, FY2025 to FY2026 Q3. Funding speed is the lender’s national median from approval to first disbursement. Names link to our data profile for each lender.
The fine print
The statements this write-up makes about the trade and its rules, as opposed to the figures, were checked against public sources on October 15, 2026. 7 claims were checked.
Run your own numbers
The deal analyzer models price, seller note, equity injection, and DSCR under current SBA terms, with every assumption adjustable.
Open the deal analyzerListing facts as stated by the listing on October 18, 2026, not independently verified. Structure, payment, DSCR, and injection figures are our own computation under the assumptions above, using the Prime rate as of October 27, 2026. Lender shortlist from the SBA 7(a) FOIA file, FY2025 to FY2026 Q3, as of June 30, 2026. Methodology. See an error? Email us and we will correct it.